Call: 865-789-1369 or Email: info@4x4TractorWork.com
Drill Bits & Chain Saw Sharpening Service!
Husqvarna, Stihl, Poulan, Homelite, and all other chain saws.
If you have a drawer full of chipped,
broken, and/or dull drill bits, we have a service that will make these bits
useful again.
Power drill bits can be very expensive and
generally go dull after only a few uses. Rather than spending $4 or $5 for a new
bit, bring them by and for $.50 per bit we'll put on a like-new point with the
perfect bevel and taper. We can handle standard drill bits, split point drill
bits and masonry drill bits. Virtually any size bit can be sharpened. And the
time to sharpen each bit makes it a practical process while you wait, a handful
of bits can be completed in 30 minutes. We will sharpen any number of bits, one
or one hundred.
Call to make your appointment, or just drop by and we can probably complete them
while you wait. This sharpener does a fantastic job, it will even put a
professional point on a bit that was originally not quite right, I had several
of those in my case and didn't know it.
If you have a lot of bits and would like us to
come by and complete the job at your site, the same $.50 per bit fee applies
plus a $15 travel charge. If you have a lot of bits, this may be a cost
effective way to make them all usable again. We don't even need a power source
or bench to work on, we have a generator in the bed of the pickup and the
tailgate works great as a work bench.
Call to make arrangements.... 865-789-1369
3/32"- 3/4" size drill capacity 2.5-19mm metric size drill bit capacity 42-1,
A-Z Letter size drill bit capacity Point capacity: Conventional, Split point and
Masonry Sharpening time 30-90 seconds (depending on drill size and amount of
wear).
Our Sharpening Instrument, it does a
beautiful job on any bit.
NOTE: For our friends from out of town, we have an option that will allow you to
get like-new drill bits without traveling to Dandridge, TN. Mail them in along
with a check for the number of drill bits included in your shipment times $.50
each and $10 to cover return shipping and handling.
We will sharpen your drill bits Chain Saw chains and return them to you by priority mail. For overnight return delivery add an additional $5.
Call if you have any
questions...Call:
865-789-1369 or email at
info@4x4TractorWork.com
Drop-off, Pick-up, or Mail-in Service.
Drill Bits _____ X $0.50, + Chain Saw
chains _____ X $3.00 = Total ______
Shipping Charge $10.00
Total ______
Thank you,
Call:
865-789-1369
or Email:
info@4x4TractorWork.com